Item		Unit	α-S50iB
Clamping Unit	Tonage	kN	500 (50tonf)						500 (50 tonf) High precision clamp
	Maximum and minimum die height Double platen Single platen	mm	350/150 410/210						350/150 —
	Clamping stroke	mm	250						250
	Tie bar spacing (H x V)	mm	360 x 320						360 x 320
	Platen size (H x V)	mm	500 x 470						500 x 470
	Ejector point/ Ejector force/ Ejector stroke	point/kN/mm	5 / 20 (2.0 tonf) / 70						5 / 20 (2.0 tonf) / 70
Injection unit	Screw diameter	mm	18	20	22	26	28	32	14	16	18	20	22	26	28	32
	Maximum injection volume	cm³	19	24	29	50	58	76	9	11	19	24	29	50	58	76
	Injection specification	—	350mm/s						350mm/s
	Max. inj. prs. (High prs.mode)	MPa	300	360	340	290	250	190	—	330	300	360	340	290	250	190
	Max. inj.prs. (W/C)	MPa	280	310	290	240	220	180	250	280	280	310	290	240	220	180
	Max. inj. prs. (General purpose)	MPa	260	280	260	210	190	150	250	250	260	280	260	210	190	150
	Maximum injection speed	mm/s	350						350
	Maximum screw rotation speed	min^-1	450						450
	Injection specification	—	550mm/s						550mm/s
	Max. inj. prs.(High prs.mode)	Mpa	300	330	—	—	—	—	—	330	300	330	—	—	—	—
	Max. inj. prs.(W/C)	MPa	280	310	280	200	170	—	—	280	280	310	280	200	170	—
	Max. inj. prs.(General purpose)	MPa	260	280	260	190	170	—	—	250	260	280	260	190	170	—
	Maximum injection speed	mm/s	550					—	—	550						—
	Maximum screw rotation speed	min^-1	450					—	—	450						—

Máy ép nhựa Fanuc Roboshot α-S50iB (Mới)