| Item | Unit | α-S50iB | ||||||||||||||
| Clamping Unit | Tonage | kN | 500 (50tonf) | 500 (50 tonf) | ||||||||||||
| Maximum and minimum die height
Double platen Single platen |
mm |
350/150 410/210 |
350/150 | |||||||||||||
| Clamping stroke | mm | 250 | 250 | |||||||||||||
| Tie bar spacing (H x V) | mm | 360 x 320 | 360 x 320 | |||||||||||||
| Platen size (H x V) | mm | 500 x 470 | 500 x 470 | |||||||||||||
| Ejector point/ Ejector force/ Ejector stroke | point/kN/mm | 5 / 20 (2.0 tonf) / 70 | 5 / 20 (2.0 tonf) / 70 | |||||||||||||
| Injection unit | Screw diameter | mm | 18 | 20 | 22 | 26 | 28 | 32 | 14 | 16 | 18 | 20 | 22 | 26 | 28 | 32 |
| Maximum injection volume | cm3 | 19 | 24 | 29 | 50 | 58 | 76 | 9 | 11 | 19 | 24 | 29 | 50 | 58 | 76 | |
| Injection specification | — | 350mm/s | 350mm/s | |||||||||||||
| Max. inj. prs. (High prs.mode) | MPa | 300 | 360 | 340 | 290 | 250 | 190 | — | 330 | 300 | 360 | 340 | 290 | 250 | 190 | |
| Max. inj.prs. (W/C) | MPa | 280 | 310 | 290 | 240 | 220 | 180 | 250 | 280 | 280 | 310 | 290 | 240 | 220 | 180 | |
| Max. inj. prs. (General purpose) | MPa | 260 | 280 | 260 | 210 | 190 | 150 | 250 | 250 | 260 | 280 | 260 | 210 | 190 | 150 | |
| Maximum injection speed | mm/s | 350 | 350 | |||||||||||||
| Maximum screw rotation speed | min-1 | 450 | 450 | |||||||||||||
| Injection specification | — | 550mm/s | 550mm/s | |||||||||||||
| Max. inj. prs.(High prs.mode) | Mpa | 300 | 330 | — | — | — | — | — | 330 | 300 | 330 | — | — | — | — | |
| Max. inj. prs.(W/C) | MPa | 280 | 310 | 280 | 200 | 170 | — | — | 280 | 280 | 310 | 280 | 200 | 170 | — | |
| Max. inj. prs.(General purpose) | MPa | 260 | 280 | 260 | 190 | 170 | — | — | 250 | 260 | 280 | 260 | 190 | 170 | — | |
| Maximum injection speed | mm/s | 550 | — | — | 550 | — | ||||||||||
| Maximum screw rotation speed |
min-1 |
450 | — | — | 450 | — | ||||||||||
